Refer to this page if you are after Outcome Codes for all States and Territories in Australia.
If you are after SDR codes instead, click on Outcome Codes (New Zealand)
Wisenet makes every attempt to ensure that the data listed below is correct. However, these codes may be subject to change. It is your RTO‘s responsibility that you use the correct outcome codes as listed in the AVETMISS documentation for each state that you deliver in.
| Outcome Code | Outcome Description | States | When to Use | Audit Rules | Action Required |
|---|---|---|---|---|---|
| 12 | Underpinning Knowledge or off the job training completed | QLD | To be used for traineeship/apprenticeship programs where a student has attempted all of the requirements for off the job training and has completed the same satisfactorily | ||
| 14 | Unsuccessful on the job competency assessment | QLD | To be used for traineeship/apprenticeship programs where a student has attempted all of the requirements for on the job training and has not completed the same satisfactorily | ||
| 20 | Competency achieved/pass | ACT, NSW, NT, QLD, TAS, VIC | To be used for Accredited training where a student has been assessed and satisfies all the requirements in the unit of competency or accredited module. | Primary documentation showing the assessors determination of the outcome,endorsed by the assessor | When the Unit Enrolment start date is the actual start date and the Unit Enrolment End date is the date that the Student was deemed Competent SET Outcome Code = 20 |
| 25 | Competency achieved/pass (School Based Apprentices and Trainees) or Competency Achieved/Pass as determined via Gap Training and Assessment | QLD, VIC | Like Outcome 20, the school based trainee has been assessed and satisfies all the requirements for the Subject (unit of competency or module), however competency has been recognised via Gap Training and Assessment as opposed to standard training and assessment | Primary documentation showing the assessors determination of the outcome,endorsed by the assessor | |
| 30 | Competency not yet achieved / failed (NYC) | ACT, NSW, NT, QLD, TAS, VIC | To be used for Accredited training where a student has attempted all of the requirements for assessment and has been deemed not yet competent or has not satisfied one or more of the requirements in the unit of competency or accredited module. | Evidence must show that the student has undertanken or attempted all assessments for the unit of competency or module | When the Unit Enrolment start date is the actual start date and the Unit Enrolment End date is the date that the Student was deemed Not Yet Competent SET Outcome Code = 30 |
| 35 | Competency not achieved/fail (School Based Apprentices and Trainees) | QLD | To be used for Accredited training where a school based trainee has attempted all of the requirements for assessment and has been deemed not yet competent or has not satisfied one or more of the requirements in the unit of competency or accredited module. | Evidence must show that the student has undertanken or attempted all assessments for the unit of competency or module | |
| 40 | Withdrawn | ACT, NSW, NT, QLD, TAS, VIC | To be used when a student has engaged in learning activity in a unit of competency or module but has either formally withdrawn, has stopped attending classes or has not attempted all assessments for the unit of competency or module | Evidence must be available that clearly shows how the student has engaged in learning activity in the unit of competency or module. Where the unit of competency or modyle delivery is clustered with others a session plan or mapping must be provided to show where the student engaged in learning activity in the specific unit of competncy or module being audited. | Student withdraws prior to commencement: Set Outcome Code = 40 Unit Enrolment End Date = Withdrawal Date Actual Hours = '0' or blank Student withdraws after commencement: Set Outcome code = 40 Unit Enrolment End Date = Withdrawal Date Actual hours = Hours attended |
| 41 | Incomplete due to RTO closure | ACT, NSW, NT, QLD, TAS, VIC | If your RTO is closing, all incomplete nationally recognised training activity needs to be reported with the outcome 41. This is to ensure that the Learner is not unfairly disadvantaged on their USI transcript through an RTO's closure. | If your RTO is closing, change all incomplete outcomes of 40 (Withdrawn) and 70 (Continuing Enrolment) to 41 | |
| 50 | RPL Commenced | VIC | The Learner is in the process of being assessed for recognition of prior learning but no result is yet available. | This code will be valid for final reporting for a collection year only if the Enrolment Activity End Date is in a future year. | |
| 51 | Recognition of Prior Learning (RPL) Granted | ACT, NSW, NT, QLD, TAS, VIC | To be used when a student has undergone an RPL assessment process and RPL has been granted. RPL assessment invoices the assessment of previously unrecognised skills and knowledge a student has achieved outside of the formal education system. | Evidence showing that the student was assessed for RPL against the elements in the unit of competency as well as a determination that the student has been granted RPL is required. | Set Delivery Mode = 90 and Set outcome = 51 |
| 52 | RPL - Not Granted | ACT, NSW, NT, QLD, TAS, VIC | To be used when the student has undergone an RPL assessment process and the RPL is not granted | Evidence showing that the student has been assessed for RPL in the unit of competency or module and that the RPL has not been grantedas well as a determination that the student has been granted RPL is required. | Set Delivery Mode = 90 and Set outcome = 52 |
| 60 | Credit Transfer (CT) | ACT, NSW, NT, QLD, TAS, VIC | To be used where a student has successfully completed training in a module or unit of competency and a credit or mutual recognition is to be granted. This is an administrative process and requires no formal training or assessment of the students' knowledge. | Evidence of the successful completion of the previous unit of competency or module and the credit transfer singed off by the assessor is required. | Set the Unit Enrolment Start and Unit Enrolment End date the day the Student has been given the Creit Transfer SET outcome = 60 |
| 61 | Superseded subject | ACT, NSW, NT, QLD, TAS, VIC, WA | From 1 January 2015, the Outcome Identifier National code 61-‘superseded subject’ may be used to report on superseded subjects. Outcome Identifier 61-superseded subject is only to be used if your RTO has reported a continuing enrolment from a previous year (Outcome Identifier National 70 - continuing enrolment). The final outcome for the student should show against the new unit of competency or module. | Evidence of commencement of training or learning in the superseded unit of competency or module is required | NCVER Fact Sheet |
| 65 | Superseded Qualification | QLD | To be used when transitioning a student from a superseded qualification to the new qualification in accordance with the transition and teachout rules prescribed by ASQA. It applies in instances when a unit of competency has been successfully completed under the old qualification however, the superseded competency does not map directly into the new competency, requiring additional training. Where gap training is required and successfully completed by the student, the PQS must report outcome code 65 in order to attract a five per cent payment in recognition of the additional training delivered. Using outcome code 65 will not affect the number of competencies undertaken to date by the student. The rule is attached to the student not the PQS. Therefore a PQS must carry out a mapping process (and retain evidence of this process) for each student who transitions from an old qualification to a new. Where direct mapping is identified, credit transfers are to be applied. Where partial mapping is identified and gap training is required, a 65 outcome is to be applied if the student successfully completes the gap training. There is no payment for failure of gap training. Where no mapping is identified the PQS is to deliver the entire unit of competency. | No co-contribution fees can be charged for this Outcome Identifier. | |
| 70 | Continuing enrolment | ACT, NSW, NT, QLD, TAS, VIC | To be used when a student has begun training in a unit but will not recieve a final outcome before the end of the Collection year and intends continuing study in the following year. The competency or module has commenced and the end date will be in the following year. The final outcome must be issued by the end date. | Evidence must be made available that clearly shows how the student has engaged in learning activity in the unit of competency or module. A session plan or mapping document must be provided to show where the student has engaged in learning activity in the specific unit of competency or module being audited. | |
| 70-AP | Academic Pass | SA | To be used when a student has begun training in a unit and has completed the theory, but will not recieve a final outcome until they have completed a workplace assessment. This outcome will be changed to a final outcome before the End date. If the student does not do the work placement assessment the outcome should be changed to 40 - withdrawn before the End date. | Evidence must be available that clearly shows how the student has engaged in the learning activity in the unit of competency or module. Where the unit of competency or module delivery is clustered with other units, a session plan or mapping document must be provided to show where the student engaged in learning activity in the specific unit of competency or module being audited. | |
| 79 | Waiting Employer Signoff or a Practical Placement | VIC | To be used for enrolments where the student has completed the supervised training and/or assessment component of the training at an RTO and is now awaiting employer signoff to be deemed competent or where the student has completed the supervised training and/or assessment component of the training at the RTO and is now waiting for a practical placement. | Only valid in final upload for collection year where Activity End Date is in a future collection year. | |
| 81 | Non-assessable enrolment - Satisfactorily completed | ACT, NSW, NT, QLD, TAS, VIC | To be used when a student attends sufficient training to satisfy the requirements on a non-assessable module. Not to be used against accredited units or modules which are government funded. | Evidence of engagement in the learning activities for the unit of competency or module must be made available. | |
| 82 | Non-assessed enrolment - Withdrawn or not satisfactorily completed | ACT, NSW, NT, QLD, TAS, VIC | To be used when a student commences training in a non-accredited module which has no assessment requirements and their attendance is not sufficient to use an outcome of 81. Not to be used against accredited units or modules which are Government funded. | Evidence of engagement in the learning actvities for the unit of competency or module must be made avaliable. | |
| 85 | Not yet started | ACT, NSW, NT, QLD, TAS, VIC | This is a preliminary outcome code that may be used when the Learner has enrolled in a subject, but has not yet commenced activity. NSW: It is compulsory for 'Not Yet Started' activity to be included in AVETMISS data submission. Other States: It is not required to be included. | Use in the Outcome identifier. | |
| 99 | Started but not yet resulted | NT, SA | |||
| NS | Not Started | NT | |||
| TNC | Training Not Completed | ACT, NSW, NT, QLD, TAS, VIC | The Outcome identifier – training organisation is used to indicate that a Learner has discontinued all training in the Qualification or Course (not just a single Unit of Competency) | Use in the Outcome Identifier - Training organisation field | |
| Deferral | ACT, NSW, NT, QLD, TAS, VIC | The Outcome identifier – training organisation is used to indicate that a Learnner has deferred training in the Qualification or Course in accordance with the Smart and Skilled Contract. | Use in the Outcome Identifier - Training organisation field |
This is only applicable for WA funded Learners
| Outcome Code | Outcome Description | When to Use | Audit Rules | Action Required |
|---|---|---|---|---|
| 1 | Competent | To be used for Accredited training where a student has been assessed and satisfies all the requirements in the unit of competency or accredited module. | Primary documentation showing the assessors determination of the outcome,endorsed by the assessor | When the Unit Enrolment start date is the actual start date and the Unit Enrolment End date is the date that the Student was deemed Competent SET Outcome Code = 1 |
| 2 | Not competent | To be used for Accredited training where a student has attempted all of the requirements for assessment and has been deemed not yet competent or has not satisfied one or more of the requirements in the unit of competency or accredited module. | Evidence must show that the student has undertanken or attempted all assessments for the unit of competency or module | When the Unit Enrolment start date is the actual start date and the Unit Enrolment End date is the date that the Student was deemed Not Yet Competent SET Outcome Code = 2 |
| 3 | Non-assessable enrolment – Withdrawn or not satisfactorily completed | To be used when a student has engaged in learning activity in a unit of competency or module but has either formally withdrawn, has stopped attending classes or has not attempted all assessments for the unit of competency or module | ||
| 4 | Non-assessable enrolment - Satisfactorily completed | To be used when a student attends sufficient training to satisfy the requirements on a non-assessable module. Not to be used against accredited units or modules which are government funded. | ||
| 5 | Participating, but studies not finished (with evidence of Training) | Only valid for enrolments where documented evidence of participation is readily available, and whose Unit Enrolment Start Date is before the Lodgement Date, and whose Unit Enrolment End Date is after the Lodgement Date. | ||
| 6 | Recognition of Prior Learning (RPL) granted | Client has been successfully assessed against the required learning or competency outcomes for previously unrecognised skills and knowledge achieved outside the formal education and training. | Evidence showing that the student was assessed for RPL against the elements in the unit of competency as well as a determination that the student has been granted RPL is required. | |
| 7 | Recognition of Prior Learning (RPL) not granted | Assessed for RPL, the student didn't pass RPL assessment and elected not to undertake training | ||
| 9 | Credit Transfer granted | Client has previously completed a unit/s of competency and has been granted application for mutual recognition. | Evidence of commencement of training or learning in the superseded unit of competency or module is required | |
| 10 | Withdrawn formally (after some participation) | To be used when a student has engaged in learning activity in a unit of competency or module but has either formally withdrawn, has stopped attending classes or has not attempted all assessments for the unit of competency or module | Student withdraws prior to commencement: Set Outcome Code = 10 Unit Enrolment End Date = Withdrawal Date Actual Hours = '0' or blank Student withdraws after commencement: Set Outcome code = 10 Unit Enrolment End Date = Withdrawal Date Actual hours = Hours attended | |
| 11 | Discontinued – no formal withdrawal (after some participation) | To be used when a student has engaged in learning activity in a unit of competency or module but has discontinued studies without any notice. | Student withdraws prior to commencement: Set Outcome Code = 10 Unit Enrolment End Date = Withdrawal Date Actual Hours = '0' or blank Student withdraws after commencement: Set Outcome code = 10 Unit Enrolment End Date = Withdrawal Date Actual hours = Hours attended | |
| 55 | Participating, but studies not finished (With NO evidence of Training) | Only valid for enrolments where there is NO evidence of participation readily available, and whose Unit Enrolment Start Date is before the Lodgement Date, and whose Unit Enrolment End Date is after the Lodgement Date. | ||
| 100 | Did not start – no participation | To be used when a student hasn't started or engaged in any learning activity in a unit of competency or module. | ||
| 105 | Not yet started | Only valid for enrolments whose Unit Enrolment Start Date is after the Lodgement Date. | Must have Unit Enrolment Start and End Dates in the future. |
| Outcome Code | Outcome Description | States | Expiry Date |
|---|---|---|---|
| @@ | Withdrawn – Did Not Start – DO NOT REPORT IN AVETMISS | ACT, NSW, NT, QLD, TAS, VIC | |
| 13 | Successfully completed on the job competency assessment | QLD | |
| 53 | Recognition of Current Competency (RCC) | ACT, NSW, NT, QLD, TAS, VIC | No longer used from 1 January 2012 |
| 54 | Recognition of current competency - not granted | ACT, NSW, NT, QLD, TAS, VIC | No longer used from 1 January 2012 |
| 66 | Did Not Start | NSW | This is obsolete as was used in APL - Indicates that no training activity occurred at all in the UoC/Module. Particularly useful where the UoC/Modules are reported prior to enrolment and the Learner withdraws from the training before any participation in that UoC/ModuleAn accredited course and they chose at the time of enrolment not to be assessed Non accredited units that are not asses |
| 90 | Result not available | ACT, NSW, NT, QLD, TAS, VIC | No longer used from 1 January 2017 |
| 00 | Indicates that training has not yet commenced or is still occurring in the unit of competency or module. Note that the unit of competency or module is to be subsequently finalised with the relevant outcome. | NSW | No longer used from July 2018 |